Installing The Nortel Ethernet Routing Switch 5500 Series On A Table Or Shelf - Nortel 5500 series Installation Manual

20 Installing the Nortel Ethernet Routing Switch
4. Documentation
Installing the Nortel Ethernet Routing Switch 5500 Series on a table
or shelf
A single 5500 Series Nortel Ethernet Routing Switch can be installed on
any flat surface. The surface should ideally be able to support the combined
weight of the switch and attached cables; between 15 and 20 pounds (7
to 9 kilograms).
To install a 5500 Series switch on a table or shelf, follow this procedure:
Step
1
Copyright © 2005 - 2006, Nortel Networks
.
CAUTION
Do not place a Nortel Ethernet Power Supply Unit 10 or Nortel
Ethernet Redundant Power Supply 15 on top of a Nortel Ethernet
Routing Switch 5500 Series. The switch housing of a 5500 Series
Nortel Ethernet Routing Switch is not strong enough to support
the weight of these units. For a translation of this statement, see
"Translations of safety messages" (page 61)
Action
Attach the provided rubber footpads at the locations noted in
"Attaching the rubber footpads" (page 21)
switch.
Nortel Ethernet Routing Switch 5500 Series
Installation
NN47200-300 2.00 Standard
5.0 7 July 2006
on page 61.
on the bottom of the
Nortel Networks Confidential