Terminology And Notation - Omron SYSMAC CP Series Instruction & Reference Manual

Terminology and Notation

Term
E-type CPU Unit
N-type CPU Unit
NA-type CPU Unit
CX-Programmer
6
A basic model of CPU Unit that support basic control applications using instructions such
as basic, movement, arithmetic, and comparison instructions.
Basic models of CPU Units are called "E-type CPU Units" in this manual.
An application model of CPU Unit that supports connections to Programmable Terminals,
inverters, and servo drives.
Application models of CPU Units are called "N-type CPU Units" in this manual.
An application model of CPU Unit that supports built-in analog and connections to Pro-
grammable Terminals, inverters, and servo drives.
Application models of CPU Units with built-in analog are called "NA-type CPU Units" in
this manual.
A programming device that applies for programming and debugging PLCs.
The CX-Programmer includes the Micro PLC Edition CX-Programmer (CX-One Lite), the
CX-Programmer (CX-One) and the CX-Programmer for CP1E.
This manual describes the unique applications and functions of the Micro PLC Edition
CX-Programmer version 9.03 or higher CX-Programmer for CP1E.
"CX-Programmer" refers to the Micro PLC Edition CX-Programmer version 9.03 or higher
CX-Programmer for CP1E in this manual.
Note E20/30/40 and N20/30/40 CPU Units are supported by CX-Programmer version 8.2
or higher. E10/14, N14/60 and NA20 CPU Units are supported by CX-Programmer
version 9.03 or higher.
Description
CP1E CPU Unit Instructions Reference Manual(W483)