At+Cind Indicator Control - Siemens MC55 Command Set

MC55 AT Command Set
3.2 AT+CIND
3.2

AT+CIND Indicator control

This command controls information about status changes via URC presentation of the MC55 or connected items,
e.g. battery charge level, signal quality, service availability, sound generation, indication of unread short mes-
sages, full SMS storage, call in progress or roaming activities.
Use of this command is outdated since additional indications and functionality are available with
supports two ways to get the values related to indicators:
AT+CIND
• Query the current status of each indicator by using the read command
matter whether
=[ [,
AT+CIND <state>
• Evaluate one of the "
+CIEV
of the associated indicator changes.
The presentation of these URCs depends on two settings:
- The indicators must be registered with the write command
default, all of them are registered when the ME is switched on. Any URC can be excluded if deregistered
with =0.
<state>
- URC presentation must be enabled with
Syntax
Test Command
AT+CIND=?
Response(s)
+CIND: (
<indDescr>
...]]
OK
Read Command
AT+CIND?
Response(s)
[,
+CIND: <indValue>
OK
ERROR
+CME ERROR: <err>
Write Command
[,
AT+CIND=<state> <state>
Response(s)
OK
ERROR
+CME ERROR: <err>
MC55_ATC_V01.05
Confidential / Released
the indicator has
[,...]]].
<state>
" URCs which the ME automatically sends to the application, whenever the value
AT+CMER
, list of supported
<indValue>
[, ...]]
<indValue>
[, ...]]
Page 66 of 469
AT+CIND
been registered with
AT+CIND
.
s)[, ( , list of supported
<indDescr>
s
m
obile
AT^SIND
?. It returns the status no
the write command
=[ [, [,...]]]. By
<state> <state>
<indValue>
2/10/04
.
s)[,