Siemens MC55 Command Set page 289

MC55 AT Command Set
11.6 AT+FCLASS
• If is set to 1 or 2, all incoming calls will be answered as fax calls with
<n>
channel 1 resp. ASC0. For calls explicitly signalled as voice or data calls, this procedure will fail with result
code "NO CARRIER", but the call in question will continue to ring.
It is possible to change the setting of
with .
ATA
MC55_ATC_V01.05
Confidential / Released
to 0 while the call is ringing, and accept the call normally afterwards
<n>
Page 289 of 469
s
m
, if is issued on multiplexer
ATA ATA
obile
2/10/04