Siemens MC55 Command Set page 236

MC55 AT Command Set
9.10 AT+CLIR
(num)
<m>
Parameter shows the subscriber CLIR service status in the network:
0
1
2
3
4
Note
• The settings made with
or =0 is used.
AT+CLIR
MC55_ATC_V01.05
Confidential / Released
CLIR not provisioned
CLIR provisioned in permanent mode
Unknown (e.g. no network, etc.)
CLIR temporary mode presentation restricted
CLIR temporary mode presentation allowed
=1 or
AT+CLIR AT+CLIR
Page 236 of 469
=2 are used for all outgoing calls until the ME is switched off
s
m
obile
2/10/04