Siemens MC55 Command Set page 86

MC55 AT Command Set
3.5 ATS18
Note
• The command applies only to circuit switched data and fax calls. For voice calls extended call release reports
can be retrieved using the command
Examples
EXAMPLE 1
ATS18=1
OK
ATD03012345678
+CAUSE: 8:17
BUSY
EXAMPLE 2
ATS18=1
OK
ATD03012345678
CONNECT 9600/RLP
Hello,....
+++
+CAUSE: 8:16
NO CARRIER
MC55_ATC_V01.05
Confidential / Released
.
AT+CEER
Enables the presentation of extended call release reports.
Now, a mobile originated data call fails.
An extended error report is output, followed by the result code BUSY.
The Location ID 8 stated in section
17 = "User busy".
Enables the presentation of extended call release reports.
Now, a mobile originated data call is set up.
Call ends after remote party hung up.
Normal call release is reported, followed by the result code NO CAR-
RIER.
The Location ID 8 stated in section
16 = "Normal call clearing".
Page 86 of 469
s
m
3.4.1 points to section 3.4.6, where
3.4.1 points to section 3.4.6, where
obile
2/10/04