At^spbd Purge Phonebook Memory Storage - Siemens MC55 Command Set

Hide thumbs Also See for MC55:
Table of Contents

Advertisement

MC55 AT Command Set
15.6 AT^SPBD
15.6

AT^SPBD Purge phonebook memory storage

This command is used to purge the selected phonebook
in the selected phonebook storage will be deleted.
CAUTION! The operation cannot be stopped nor reversed!
Automatic purging of phonebooks is performed when the SIM card is removed and replaced by a different SIM
card. This affects the ME-based part of the "LD" storage, and storages "MC" and "RC". Storage "ME" is not
affected.
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
Syntax
Test Command
AT^SPBD=?
Response(s)
^SPBD: list of supported
OK
+CME ERROR
Write Command
AT^SPBD=<storage>
Response(s)
OK
+CME ERROR
PIN
ASC0
ASC1
MUX1
%
%
%
Reference(s)
SIEMENS
Command Description
The test command returns a list of supported
The write command is used to select the phonebook
MC55_ATC_V01.05
Confidential / Released
s
<storage>
MUX2
MUX3
%
%
%
<storage>
Page 381 of 469
manually, i.e. all entries previously stored
<storage>
s.
to be purged.
<storage>
s
m
obile
2/10/04

Advertisement

Table of Contents
loading

Table of Contents