Siemens MC55 Command Set page 111

Hide thumbs Also See for MC55:
Table of Contents

Advertisement

MC55 AT Command Set
5.3 AT^SPIC
If the responses to "
AT+CPIN
and the referrer of the execute command "AT^SPIC" is explicitly undefined.
In these cases, the read command "AT^SPIC?" may be used to determine, which password the response of the
execute command actually refers to. Also, the write command may be used in order to retrieve the counter for a
specific password.
The write command returns the number of attempts still available for entering the password identified by
, e.g. the PIN, PIN 2, PH-SIM PIN etc.
<facility>
Parameter Description
(num)
<counter>
Number of attempts for the currently required password. This number will be counted down after each failure.
(str)
<facility>
password for which the corresponding PIN counter is to be displayed .
"SC"
"PS"
"P2"
"PN"
(text)
<code>
Identification of the currently required password.
SIM PIN
SIM PUK
SIM PIN2
SIM PUK2
PH-SIM PIN
PH-SIM PUK
PH-NET PIN
PH-NET PUK
Notes
Whenever the required password changes,
examples below.
MC55_ATC_V01.05
Confidential / Released
?" and "
?" both read "READY", there is no currently required password,
AT+CPIN2
SIM PIN or SIM PUK. If the SIM PIN has been deactivated after three failed
attempts, the counter for SIM PUK will be returned instead.
"phone code" or "device code" (cf.
entered three times, the Master Phone Code is required to lift the lock and the
number of remaining attempts for the master phonecode will be returned.
SIM PIN 2 or SIM PUK 2. If the SIM PIN 2 has been deactivated after three
failed attempts, the counter for SIM PUK 2 will be returned instead.
Network Personalisation
ME is waiting for SIM PIN1.
ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to
enter PIN1.
ME is waiting for PIN2, when the attempt to access PIN2 requiring features was
acknowledged with +CME ERROR:17 (e.g. if client attempts to edit the FD
phonebook).
ME is waiting for PUK2 to unblock a disabled PIN2. Necessary if preceding
command was acknowledged with error +CME ERROR:18.
ME is waiting for phone-to-SIM card password if ''PS'' lock is active and user
inserts other SIM card than the one used for the lock. (''PS'' lock is also referred
to as phone or antitheft lock).
ME is waiting for Master Phone Code, if the above ''PS'' lock password was
incorrectly entered three times.
ME is waiting for network personalisation password
ME is waiting for network personalisation unblocking password
<counter>
Page 111 of 469
and
AT+CLCK
changes to reflect that change. Please refer to the
s
m
obile
). If incorrectly
AT+CPWD
2/10/04

Advertisement

Table of Contents
loading

Table of Contents