At^slcc Siemens Defined Command To List The Current Calls Of The Me - Siemens MC55 Command Set

MC55 AT Command Set
7.23 AT^SLCC
7.23 AT^SLCC Siemens defined command to list the current calls of
the ME
Command ^SLCC covers essentially the same information as GSM 07.07 command
additions:
• The execute command response contains an additional parameter
cating whether the call has been assigned a traffic channel by the network (transmission of data or inband
information is possible).
• The additional write command allows to activate Event reporting for the list of current calls. If event reporting
is active for an interface, a call status transition (cf.
assignment of a traffic channel will generate an event report indication to this interface. In order to receive
this event report as an URC, the URC presentation mode for this interface has to be configured with
.
AT+CMER
The frequency of event report generation can be configured with AT command
Status Information
• The additional read command allows to determine the event reporting mode
interface receives event report indications for the list of current calls. Mind that the URC will be displayed only
if the URC presentation mode for the interface concerned has been configured with
Syntax
Test Command
AT^SLCC=?
Response(s)
OK
Read Command
AT^SLCC?
Response(s)
^SLCC: <n>
OK
Exec Command
AT^SLCC
Response(s)
[ ,
^SLCC:<idx> <dir>
[, ]] ]
<type> <alpha>
[ ,
^SLCC:<idx> <dir>
[, ]] ]
<type> <alpha>
[ ^SLCC: ...]
OK
ERROR
+CME ERROR
MC55_ATC_V01.05
Confidential / Released
for further detail on the configuration options.
, , ,
<stat> <mode> <mpty>
, , ,
<stat> <mode> <mpty>
Page 170 of 469
<traffic channel assigned>
Call Status Information
,
<traffic channel assigned>
,
<traffic channel assigned>
s
m
obile
, with the following
AT+CLCC
) and (if desired) the
. Refer to
AT^SCFG
which indicates whether the
<n>
.
AT+CMER
[, ,
<number>
[, ,
<number>
indi-
Call
2/10/04