Table of Contents
Advertisement
MC55 AT Command Set
7.22 AT+CLCC
is 'UCS2'.
Due to time constraints on the necessary evaluation of the phonebook, this parameter may show a default value
during early call phases (e.g. for
present for the number concerned.
Note
•
teleservices other than voice, data, fax are not fully supported by ME. They are used only in connection with
the handling for
AT+CSNS
MC55_ATC_V01.05
Confidential / Released
= ''dialling'', ''incoming'' or ''alerting''), even if a phonebook entry is
<stat>
, and may therefore occur in parameter
Page 169 of 469
s
for mobile terminated calls.
<mode>
m
obile
2/10/04
Advertisement
Table of Contents
