At^snfi Set Microphone Path Parameters - Siemens MC55 Command Set

MC55 AT Command Set
16.11 AT^SNFI
16.11

AT^SNFI Set microphone path parameters

Syntax
Test Command
AT^SNFI=?
Response(s)
^SNFI: (list of supported
OK
Read Command
AT^SNFI?
Response(s)
^SNFI: <inBbcGain>
OK
Write Command
AT^SNFI=<inBbcGain>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
SIEMENS
Command Description
TA sets microphone path amplifying.
Parameter Description
(num)(^SNFW)
<inBbcGain>
ADC gain adjustable in eight 6 dB steps from 0 dB to 42 dB (0=0dB, 7=42dB, 8 steps of 6 dB).
0...7
(num)(^SNFW)
<inCalibrate>
Multiplication factor for input samples. Formula to calculate the negative gain (attenuation) of the input signal:
Gain in dB = 20 * log (inCalibrate / 32768)
0...32767
MC55_ATC_V01.05
Confidential / Released
s) , (list of supported
<inBbcGain>
,
<inCalibrate>
,
<inCalibrate>
MUX2 MUX3
% % %
Page 406 of 469
s
s)
<inCalibrate>
m
obile
2/10/04