Table of Contents
Advertisement
MC55 AT Command Set
15.8 AT^SPBS
209
129
(str)(+CSCS)
<text>
Text assigned to the phone number.
(num)
<RealLocReq>
Is a display of the "real"
[0]
1
(num)
<location>
The location within phonebook memory at which the corresponding entry is located.
This location may be used for other phonebook commands (e.g.
<internal-counter>
(&F)
0
...maxindex
Note
•
The complete list of sorted entries can be retrieved using AT command
Example
How to use AT^SPBS to browse through the sorted list forward and backward
Using AT^SPBS without
•
First,
is issued to make sure that AT^SPBS=1 starts from the first character in alphabetical order. The
AT&F
example illustrates how to search down and up again.
at&f
OK
at^spbs=1
^SPBS:1,"+999999",145,"Arthur"
^SPBS:2,"+777777",145,"Bill"
^SPBS:3,"+888888",145,"Charlie"
OK
MC55_ATC_V01.05
Confidential / Released
dialling string
<number>
ters saved with the number string.
For phonebook entries with this <type>, dialling from phonebook with
ATD><mem><n>
descriptions for at command
otherwise
of the entry required?
<location>
Do not display an entry's "real" location number. Parameter
not be displayed
Display the "real" location number as parameter
entry
(num)
This Parameter is only an internal parameter and cannot modified directly.
The internal counter will be reset to index 0 after a call to
or with
<RealLocReq>
<RealLocReq>
Page 389 of 469
contains printable non-alphabetic non-digit charac-
is not possible. For further detail, check the parameter
.
AT+CPBW
,
AT+CPBR
AT^SPBG
=0
s
m
<location>
at the end of the
<location>
,
AT+CPBW
ATD><mem><n>
or
ATZ
AT&F
.
obile
will
).
.
2/10/04
Advertisement
Table of Contents
