Siemens MC55 Command Set page 344

MC55 AT Command Set
12.17 AT+CSMS
(num)
<mt>
Mobile Terminated Messages:
0
1
(num)
<mo>
Mobile Originated Messages:
0
1
(num)
<bm>
Broadcast Type Messages:
0
1
Notes
• If CSMS mode is switched from Phase 2+ to Phase 2 and one or more
specific a '+CMS ERROR: unknown error' will appear. It is recommended to switch the
to Phase 2 specific values before entering Phase 2.
• Phase 2+ (
<service>
- Configuring procedures for indicating received short messages with the
=3 and =1.
<mt> <ds>
- Acknowledging incoming short messages with
- Receiving Status Reports and acknowledging them with
MC55_ATC_V01.05
Confidential / Released
Type not supported
Type supported
Type not supported
Type supported
Type not supported
Type supported
=1) must be set before the following features can be used:
Page 344 of 469
AT+CNMI
.
AT+CNMA
.
AT+CNMA
s
m
obile
Parameter are Phase 2+
Parameters
AT+CNMI
parameters
AT+CNMI <mt>
=2 or
2/10/04