Table of Contents
Advertisement
MC55 AT Command Set
3.3 AT^SIND
(num)
<Mode>
0
1
2
Note
•
Notes regarding indicator voice message waiting:
-
"vmwait1" and "vmwait2" indicate the receipt of a short message coded as Voice Message Waiting Indi-
cator, as defined by the CPHS Phase 2 standard. The service must be provisioned by the operator.
-
The presentation mode of the indicators varies with the operator: If more than one message is received,
some operators only indicate the first one, others deliver the indicator each time a new message is put into
the mail-box.
-
The "vmwait" indicators do not apply if a network provider signals, via standard SMS, a message in the
voice mailbox. In this case, the indicator "message" will be displayed (see
-
The numbers 1 or 2 in "vmwait1/2" are related to the two lines of the Alternate Line Service (ALS), also
defined in CPHS Phase 2 standard. For further details refer to the
MC55_ATC_V01.05
Confidential / Released
Indicator is deregistered, i.e. no such indicator event report (URC) will be
issued.
Indicator is registered.
•
Indicator event reports are controlled via
•
Indicators defined by
AT^SIND
•
On the other hand indicators supported by
the MC55 is powered up.
Query the registration status and the current value of a single indicator type.
Page 72 of 469
s
.
AT+CMER
remain deregistered until explicitly enabled.
are registered while
AT+CIND
).
AT+CIND
command.
AT^SALS
m
obile
2/10/04
Advertisement
Table of Contents
