Table of Contents
Advertisement
MC55 AT Command Set
2.13 AT^SCFG
(str)(+CSCS)
<succ>
CIEV Call Status Indication
This parameter can be used to control the behaviour of URC "
Call Status Information
Parameter is global for all interfaces and will not be reset by
(P)
"restricted"
"verbose"
(str)(+CSCS)
<sucs>
SLCC Call Status Indication
This parameter can be used to control the behaviour of URC "
.
Information
Parameter is global for all interfaces and will not be reset by
"restricted"
(P)
"verbose"
Note
•
Parameters "GPRS/ATS0/withAttach" (
only for modules supporting GPRS.
Examples
EXAMPLE 1
Usage of "Audio/AMR":
AT+CSCS="UCS2"
OK
AT^SCFG?
...
^SCFG:"Audio/AMR","0065006E00610062006C00650064"
...
OK
AT+CSCS="GSM"
OK
AT^SCFG?
...
^SCFG:"Audio/AMR","enabled"
...
MC55_ATC_V01.05
Confidential / Released
.
URC ""
": call" will be issued only when a Call Status transition ends in
+CIEV
state "active" or "unknown" (see
the list of active calls
URC ""
": call" will be issued when any state transition (including transi-
+CIEV
tions beginning or ending in state "unknown") occurs in the list of active calls,
or when a traffic channel is established
URC "
" will be issued only when a Call Status transition ends in state
^SLCC
"active" or "unknown" (see
of active calls
URC "
" will be issued when any state transition (including transitions
^SLCC
beginning or ending in state "unknown") occurs in the list of active calls, or
when a traffic channel is established.
) and "GPRS/RingOnIncomingData" (
<gaa>
Page 59 of 469
":call. See also
+CIEV
.
AT&F
Call Status Information
". See also
^SLCC
AT^SLCC
.
AT&F
Call Status Information
Switch to UCS2 character set.
Query all parameters.
AMR will be used for any operator.
s
m
obile
,
and
AT+CIND
AT+CMER
) for a call in
and
Call Status
) for a call in the list
) are available
<groid>
2/10/04
Advertisement
Table of Contents
