Atdl Redial Last Telephone Number Used - Siemens MC55 Command Set

Hide thumbs Also See for MC55:

Table of Contents

MC55 AT Command Set

ATDL Redial last telephone number used

Exec Command

If there is no last number or number is not valid:

If no dialtone (parameter ATX2 or ATX4):

If busy (parameter setting ATX3 or ATX4):

If connection cannot be set up:

If successfully connected and non-voice call (TA switches to online data mode):

When TA returns to command mode after call release:

If successfully connected and voice call:

Reference(s)

Command Description

This command redials the last voice and data call number used in the ATD command. If terminated with semi-

colon ";" ATDL dials the last voice call number stored in the "LD" phonebook. Otherwise, the last dialed data or

fax number will be used (not contained in the "LD" phonebook).

This command may be aborted generally by receiving a character during execution. Abortion is not possible

during some states of connection setup such as handshaking.

MC55_ATC_V01.05

Confidential / Released

Page 150 of 469