Event, Error, And Warning Messages; Efi Error And Warning Messages - HP Integrity rx1600 Operation And Maintenance Manual

B

Event, Error, and Warning Messages

This appendix contains event, error and warning information for the hp Integrity rx1600 Server system:
• Extensible Firmware Interface (EFI) error and warning messages
• System Event Log (SEL) and Forward Progress Log (FPL) Entries

EFI Error and Warning Messages

EFI error and warning messages are displayed on the console as part of the boot process. They can also be retrieved via the
info warnings EFI command.
Table B-1 EFI Error and Warning Messages
Error
Number
2 Insufficient resources to assign to one or more I/O
devices
4 Unexpected hardware I/O configuration
7 No Baseboard Management Controller (BMC)
installed in platform
8 BMC cannot be accessed
9 One or more BMC ports failed
10 BMC system event log is full
11 Platform SCR is bad
12 Set time to BMC SEL failed
13 SEL get info failed
14 Initial BMC SEL event failed
15 Update of BMC buffered data failed
16 All Advanced Configuration and Power Interface
(ACPI) BMC ports bad
17 Read error on BMC token
Appendix B
Error/Warning Message Solution
Incorrect I/O configuration. Contact the HP
Support center for assistance.
Incorrect I/O configuration. Contact the HP Sup-
port center for assistance.
Ensure the BMC ROM is installed; update BMC
firmware
Check system logs for errors. Replace the base
unit.
Communication with the BMC failed. Check
power. Replace the base unit.
Clear SEL
Contact the HP Support center for assistance.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
Communication with the BMC failed. Replace
the base unit.
193