Installing and Configuring
Installing Processors and Memory
Step
5. Use the special processor tool (P/N 5069-5441) shipped with your replacement processor assembly to lock the
processor in place on the system board. To do this, insert the special processor tool into the lock and rotate it
clockwise 180 degrees.
Figure 4-8Locking the Processor Assembly in Place
Unlocked
Step
6. Remove the protective caps from the screws on the sequencer retaining cover.
Step
7. Place the sequencer retaining cover over the top of the heatsink.
Figure 4-9Installing the Sequencer Retaining Cover
Protective caps
38
Locked
Front of server
Front of server
Chapter 4