Eps-Ld External Power Supply Unit - Extreme Networks Summit X150 Series Hardware Installation Manual

EPS-LD External Power Supply Unit

You can use the Extreme Networks EPS-LD External Power Supply Unit (Model 45019) as a redundant
power supply with the following Extreme Networks switches:
Summit X450a-24t switch
●
Summit X450e-24p switch
●
When attached to the Summit X450e-24p switch, the EPS-LD provides 465 W total power with 375 W
dedicated for PoE applications.
The front of the EPS-LD has a green LED to indicate operating status
Table 30: LED Meanings on the EPS-LD
Power LED Meaning
Green, solid The external power supply is operating normally.
Off The external power supply is not connected.
NOTE
An AC power input cord is not provided; you can order an appropriate cord from Extreme Networks or from
your local supplier. The power cord must meet the requirements listed in
on page 311.
Each EPS-160 power supply is shipped with a special redundant power supply cord
Figure 74: EPS-LD Redundant Power Cord Connector
Summit Family Switches Hardware Installation Guide
(Table 30)
"Selecting Power Supply Cords"
(Figure
Collin's
ES4K027
XM_055
74).
93