Extreme Networks Summit X150 Series Hardware Installation Manual page 63

Summit x150 series summit x250e series summit x350 series summit x450 series summit x450a series summit x450e series summit x460 series summit x480 series summit x650 series
Hide thumbs Also See for Summit X150 Series:
Table of Contents

Advertisement

Twenty fixed autosensing 10/100/1000 BASE-T PoE ports (ports 1–20) that provide high-density
copper connectivity and a full 15.4 Watts of PoE per port
Four combination ports (ports 21–24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
NOTE
All 24 ports can provide PoE power.
LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see
Switch LEDs" on page
Stack number indicator showing the position of this switch in a stacked configuration
Serial console port used to connect a terminal and perform local management
Figure 47: Summit X450e-24p Switch Front Panel
PORTS 1 -24
POWERED (AMBER) ON=LINK
FLASHING=ACTIVITY
OFF=NO LINK/DISABLED
10G
ALTERNATE AMBER/GREEN=PWR FAULT
MGMT
1
STACK NO.
FAN
2
Stack
PSU-1
1
PSU-E
2
Stack number
indicator
The rear panel of the Summit X450e-24p switch
Slot for one of the Summit option cards listed in
one or two high-speed uplink ports to the switch.
Table 21: Port Option Cards for Summit X450e Series Switches
Option Card Model
XGM2-2xn option card
XGM2-2xf option card
XGM2-2sf option card
XGM2-2bt option card
Management port with associated LEDs
Two high-performance stacking ports with associated LEDs
Redundant power input connector for optional connection to one of the following external
redundant power supplies with full PoE power support:
-
EPS-LD External Power Supply Unit (Model 45019)
See
"EPS-LD External Power Supply Unit" on page 93
Summit Family Switches Hardware Installation Guide
67.
10/100/1000 Mbps PoE ports
1
2
3
4
5
6
7
8
9
10
11
12
NO POWER (GREEN) ON=LINK
FLASHING=ACTIVITY
OFF=NO LINK/DISABLED
(Figure
Type of Added Ports
10-gigabit XENPAK modules
10-gigabit XFP modules
10-gigabit SFP+ modules
Fixed 10GBASE-T copper
"Combination Ports and Failover" on page
"Summit X450, X450a, and X450e Series
Console
port
13
14
15
16
17
18
19
20
21
22
23
24
21X
22X
23X
24X
Shared Ports
Combination ports
SH_015B
48) includes:
Table
21. These port option cards allow you to add
For More Information, see . . .
"Summit XGM2-2xn Option Card" on page 108
"Summit XGM2-2xf Option Card" on page 109
"Summit XGM2-2sf Option Card" on page 110
"Summit XGM2-2bt Option Card" on page 110
for more information.
21.
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents