Connecting Power To The 300 W Ac Psu; Connecting Power To The 750 W Ac Psu - Extreme Networks Summit X150 Series Hardware Installation Manual

Maintenance Procedures for Summit X460 Series Switches

Connecting Power to the 300 W AC PSU

To connect power to the 300 W AC PSU:
1 Connect the AC power cord to the input connector on the PSU
2 Rotate the wire clip into place over the power cord connector.
3 Connect the other end of the power cord to an AC power outlet.

Connecting Power to the 750 W AC PSU

To connect power to the 750 W AC PSU:
1 If necessary, slide the plastic cord retainer farther away from the back of the switch (Figure 213).
Figure 213: Moving the Power Cord Retainer
SH_227
2 Connect the AC power cord to the input connector (Figure 214).
Figure 214: Connecting the Power Cord
SH_228
Summit Family Switches Hardware Installation Guide
260