Extreme Networks Summit X150 Series Hardware Installation Manual page 206

Installing Summit Family Switches
5 At the front of the switch, place a front mounting bracket against each side of the switch, in front of
the ventilation openings in the side of the switch
Make sure there is space between the bracket and the ventilation openings.
Figure 167: Positioning the Front Mounting Brackets—Two-Post Rack
6 Using the provided screws, attach each front bracket to the switch
7 Slide the switch back in the rack until the front mounting brackets are against the front of the rack
post (Figure 168).
Make sure that the ventilation holes in the side of the switch are within the open channel of the rack
post.
Figure 168: Securing the Front Mounting Brackets to the Rack
8 Using mounting screws suitable for your equipment rack, secure the mounting brackets to the front
of the rack post.
After the switch is secured to the rack, install and connect power supplies as described in
Summit X650 AC Power Supply" on page 209
page 211.
206
(Figure 167)
SH_099
(Figure
SH_100
or "Installing a Summit X650 DC Power Supply" on
Summit Family Switches Hardware Installation Guide
167).
"Installing a