Summit Option Cards and Versatile Interface Modules
Summit XGM2-2sf Option Card
The XGM2-2sf option card allows you to add one or two 10-gigabit SFP+ modules to the following
switches:
Summit X350 series switch, running ExtremeXOS 12.2.1 or later
●
Summit X450a series switch, running ExtremeXOS 12.2.1 or later
●
Summit X450e-24p or X450e-48p switch, running ExtremeXOS 12.2.1 or later
●
Summit X450e-24t or X450e-48t switch, running ExtremeXOS 12.5.1 (or later)
●
For current information about compatible SFP+ modules and the minimum required software, refer to
the most recent version of the ExtremeXOS Release Notes.
For more information about SFP+ modules, refer to the Extreme Networks Pluggable Interface Modules
Installation Guide.
Summit XGM2-2bt Option Card
The XGM2-2bt option card allows you to add two fixed 10GBASE-T ports to the following switches:
Summit X350 series switch, running ExtremeXOS 12.2.1 or later
●
Summit X450a series switch, running ExtremeXOS 12.2.1 or later
●
Summit X450e-24p or X450e-48p switch, running ExtremeXOS 12.2.1 or later
●
Summit X450e-24t or X450e-48t switch, running ExtremeXOS 12.5.1 (or later)
●
The 10GBASE-T standard (IEEE 802.3an) allows the use of standard CAT5E, CAT6, or CAT6A cable for
connection to the XGM2-2bt ports (see
Table 43: Cable Distances for the XGM2-2bt Option Card
Cable
Maximum
Type
Distance
CAT5E
55 meters
CAT6
75 meters
CAT6A
100 meters
110
Table
43).
Summit Family Switches Hardware Installation Guide