Eps-Ld External Power Supply Unit; Eps-500 External Power Supply Unit - Extreme Networks Summit X450a-24tDC Hardware Installation Manual

The EPS-T is a rack-mountable chassis or tray that holds one or two EPS-160 power supplies. Each EPS-
160 power supply provides one-to-one redundancy for an attached Extreme Networks switch.
You can order the EPS-T chassis with one or two EPS-160 power supplies already installed. You can also
order an additional power supply from your Extreme Networks reseller.
NOTE
Each EPS-160 power supply is shipped with an AC cord for use in North America and a special redundant power
)
supply cord (Figure 47 .
Figure 47: Redundant Power Cord Connector

EPS-LD External Power Supply Unit

You can use the Extreme Networks EPS-LD External Power Supply Unit (Model 45019) as a redundant
power supply with the following Extreme Networks switches:
Summit X450a-24t switch
●
Summit X450e-24p switch
●
When attached to the Summit X450e-24p, the EPS-LD provides 465 W total power with 375 W dedicated
for PoE applications.

EPS-500 External Power Supply Unit

The Extreme Networks EPS-500 External Power Supply Unit (Model 10911) provides additional power
to compatible Power over Ethernet (PoE) switches and other Extreme switches. You can use the EPS-500
power supply as a redundant power supply with the following Extreme Networks switches:
Summit X150-24p switch
●
Summit X250e-24p switch
●
Summit X350-24t switch
●
Summit X350-48t switch
●
Summit X450a-24t switch
●
Summit X450a-24x switch
●
Summit X450a-48t switch
●
Summit X450e 24p switch
●
Summit Family Switches Hardware Installation Guide
EPS-LD External Power Supply Unit
ES4K027
57