Vim2-10G4X Versatile Interface Module; Vim2-Summitstack128 Versatile Interface Module - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit Option Cards and Versatile Interface Modules

VIM2-10G4X Versatile Interface Module

The VIM2-10G4X versatile interface module
modules. For information about the supported optical modules, refer to the most recent version of the
ExtremeXOS Release Notes.
Figure 84: VIM2-10G4X Versatile Interface Module
XFP ports
S1
S2
LEDs
The XFP ports are labeled S1, S2, S3, and S4. ExtremeXOS software assigns port numbers to the XFP
ports based on the switch model in which the VIM2-10G4X module is installed (see
Table 44: Port Numbers for XFP Ports on the VIM2-10G4X Module
Summit X480-48t or
Port Summit X480-48x
Label Port Number
S1 49
S2 50
S3 51
S4 51

VIM2-SummitStack128 Versatile Interface Module

The VIM2-SummitStack128 versatile interface module
stacking ports. To connect these ports, you must use stacking cables with compatible connectors,
available from Extreme Networks.
Figure 85: VIM2-SummitStack128 Versatile Interface Module
Stack port 1 LEDs
114
(Figure
S3
S4
SH_152
Summit X480-24t
Port Number
27
28
29
30
Stack port 2
SH_153
84) provides four 10-Gbps ports using XFP optical
(Figure 85) provides two 64-Gbps SummitStack
Summit Family Switches Hardware Installation Guide
Table 44).