10G4X I/O Module - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

BlackDiamond 8000 Series Modules

10G4X I/O Module

The 10G4X I/O module
NOTE
The 10G4X module is not compatible with the 8900-G96Tc module. If a 10G4X module and an
8900-G96Tc module are installed in the same chassis, only one of these modules will function.
Figure 16: 10G4X I/O Module
Module status LEDs
In the default configuration of the 10G4X I/O module, all ports:
Are added to the default VLAN as untagged.
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
The 10G4X I/O module has the following LEDs:
Module status
●
Module diagnostics
●
Port status
●
For information about the LEDs and their activity on the 10G4X I/O module, see
on page 53. For information about the XENPAK interfaces, see the Extreme Networks Pluggable Interface
Modules Installation Guide.
32
(Figure 16) has four unpopulated XENPAK-based 10 Gigabit Ethernet ports.
10 Gbs ports
BlackDiamond 8800 Series Switches Hardware Installation Guide
ASP040A
"I/O Module LEDs"