Table of Contents
Advertisement
"Authentication ID": Enter an authentication ID
(1–60 characters [alphanumeric, space, symbols])
(Page 116). &, <, >, comma (,), double quotation
mark (") cannot be entered.
"Authentication Password": Enter an
authentication password (0–60 characters
[alphanumeric, space, symbols]) (Page 116). &, <,
>, comma (,), double quotation mark (") cannot be
entered.
Note
•
"Authentication ID" and "Authentication
Password" can only be set when
"Authentication" is set to "ON".
•
While being entered, the characters of the
authentication password are displayed, but
once the settings are saved, all the
characters will be displayed as asterisks (*),
and you will no longer be able to check the
authentication password on the screen.
Record the authentication password
beforehand, and store it in a safe location.
•
When the authentication password is
displayed as asterisks (*), pressing [Y]
deletes the entire authentication password.
"H.460": Use [
][
"OFF" (default).
•
This setting is available only when "OFF" is
selected for "Static NAT" (Page 105) and
"ON" is selected for "Gatekeeper".
Making Static NAT Settings
Note
•
To change the static NAT settings, it is
necessary to configure system settings,
including the port number settings. For details,
contact your dealer.
•
This setting is available only when "IP
Address" is set to "Manual" in "Network
Settings" (Page 87).
1.
Login to the administrator menu (Page 101).
•
The admin menu screen is displayed.
2.
Press [
].
•
The second page is displayed.
] to select "ON" or
3.
Use [
][
] to select "Static NAT Settings" and
press [Enter].
•
The Static NAT settings screen is displayed.
4.
Use [
][
] to select the following items for input:
"Static NAT": Use [
"OFF" (default).
Note
•
To select "ON", "H.460" must be set to
"OFF" on the H.323 settings screen
(Page 105).
•
When "ON" is selected, the IP address of
the WAN side will be displayed for the unit
information on the Home screen (Page 27).
"WAN IP Address": Enter the WAN IP address of
the router.
Note
•
If the IP address contains 1 or 2 digit
numbers, enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"RTP and RTCP for Audio": Enter the initial port
number (5100–5194) for RTP and RTCP for Audio
(default: 5100).
"RTP and RTCP for Video": Enter the initial port
number (5200–5294) for RTP and RTCP for Video
(default: 5200).
"Camera Control": Enter the initial port number
(5300–5394) for controlling a video camera (default:
5300).
"SIP (2-Point)": Enter the port number for 2-party
video conference calls (5000–5099) for
communication using a SIP server (default: 5060).
Contacts and Settings
][
] to select "ON" or
User Manual
105
Advertisement
Table of Contents
