Table of Contents
Advertisement
To prevent fires, electric shock, injury, or
damage to the unit, be sure to follow
these guidelines when performing any
wiring or cabling:
a.
Before performing any wiring or
cabling, unplug the unit's power cord
from the outlet. After completing all
wiring and cabling, plug the power
cord back into the outlet.
b.
Do not place any objects on top of
the cables connected to the unit.
c.
When running cables along the floor,
use protectors to prevent the cables
from being stepped on.
d.
Do not run any cables under
carpeting.
Do not attempt to repair the power cord,
plug, or AC adaptor. If the power cord or
plug is damaged or frayed, contact an
authorised service representative for a
replacement.
Ensure that the plug connection is free
of dust. In a damp environment, a
contaminated connector can draw a
significant amount of current that can
generate heat, and eventually cause fire
if left unattended over an extended
period of time.
Stop operation immediately if the unit
emits smoke, excessive heat, abnormal
smell or unusual noise. These conditions
can cause fire or electric shock.
Immediately turn the unit off, and unplug
the power cord, and contact your dealer
for service.
Never touch the plug or AC adaptor with
wet hands. Danger of electric shock
exists.
When disconnecting the unit, grasp the
plug instead of the cord. Pulling on a
cord forcibly can damage it, and cause
fire or electric shock.
During thunderstorms, do not touch the
unit, plug and AC adaptor. It may cause
an electric shock.
Operating Safeguards
Do not alter the AC adaptor or modify
any parts. Alteration or modification can
cause fire or electric shock.
If metal fragments or water gets into the
unit, turn the unit off and unplug the unit
immediately. Contact your dealer for
service. Operating the contaminated unit
can cause fire or electric shock.
Do not use a unit in the vicinity of a gas
leak to report the leak.
Do not place the remote control in
microwave ovens or on induction
cookware.
Clean the AC plug periodically with a
soft, dry cloth to remove dust and other
debris.
Do not use the supplied power cord with
any other device. It may cause fire or
electric shock.
Unplug the unit from the AC outlet and
have it serviced by qualified service
personnel in the following cases:
a.
If the unit does not operate
according to the operating
instructions. Adjust only the controls
that are explained in the operating
instructions. Improper adjustment of
other controls may result in damage
and may require service by a
qualified technician to restore the
unit to normal operation.
b.
If the unit has been dropped or the
cabinet has been damaged.
c.
If unit performance deteriorates.
If damage to the unit exposes any
internal parts, disconnect the power cord
immediately and return the unit to your
dealer.
A headset's earpiece is magnetised and
may retain small ferrous objects.
Do not use your headset at a high
volume. The use of excessive sound
volume through a headset may cause
hearing loss.
For Your Safety
User Manual
9
Advertisement
Table of Contents
