Table of Contents
Advertisement
Contacts and Settings
including 2.30), communication will not
become audio only even if "Audio only
mode" is set to "ON".
•
When changing to Audio-only mode, it may
take some time for the blue screen to be
displayed. Until the blue screen is
displayed, the image may become
distorted.
"Still image quality": Use [
display resolution to use when you send still images
from the sub video camera to other parties.
–
"Full HD" (default [for KX-VC600]): The
resolution of still images is Full HD.
–
"HD" (default [for KX-VC300]): The resolution
of still images is HD.
Note
•
The value that you select here does not
influence the unit's operation when you
connect to an MCU or non-Panasonic video
conference system.
•
If the network has low bandwidth and a high
rate of packet loss, selecting "HD" is
recommended. For details, contact your
dealer.
•
If you are using the KX-VC300, "Full HD"
can only be selected after purchasing an
activation key card (KX-VCS401) to enable
sending images in Full HD resolution
(Page 108).
•
During a 4-party video conference call, the
display resolution will be "HD", even if you
have specified "Full HD".
"Default MIC Mute set": Use [
whether to mute the microphone(s) at the start of a
received video conference call.
–
"ON": Mutes the microphone(s).
–
"OFF" (default): Does not mute the
microphone(s).
"Call Limit time": Enter the maximum length of
time for the duration of a video conference call (in
hours and minutes).
Note
•
If you set 0 hours 0 minutes (default), the
call time is unlimited.
•
If the duration of a video conference call
exceeds the specified length of time, the call
will be automatically disconnected.
"MIC detection": Use [
enable the detection of the connection status of the
Boundary Microphones or headset.
90
User Manual
][
] to select the
][
] to select
][
] to select whether to
–
"ON" (default): Enables the detection of
Boundary Microphones or headset.
–
"OFF": Disables the detection of Boundary
Microphones or headset.
Note
•
When not using Boundary Microphones or
headset, set this to "OFF".
"Network Connection Status": Use [
select whether to display the network status
indication.
–
"ON" (default): Displays the network status
indication.
–
"OFF": Hides the network status indication.
"Active call Menu": Use [
to display the guide when a video conference call
begins.
–
"ON" (default): Displays the guide.
–
"OFF": Hides the guide.
"Noise reduction" (KX-VC600 only): Use [
[
] to select whether to enable noise reduction
when a video conference call begins.
–
"ON": Enables noise reduction.
–
"OFF" (default): Disables noise reduction.
"Displays combined screen" (KX-VC600 only):
Use [
][
] to select whether to enable the
combined screen function when displaying a
computer's screen.
–
"ON" (default): Enables the combined screen
function.
–
"OFF": Disables the combined screen function.
"Receive H.239 Call": Use [
"ON" (default) or "OFF".
Note
•
To select "ON", "H.323" must be set to
"ON" (Page 102).
5.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
6.
Use [
][
] to select "Yes" and press [Enter].
•
The system settings screen is displayed.
7.
Press [Home].
•
The Home screen is displayed.
][
] to
][
] to select whether
]
][
] to select
Advertisement
Table of Contents
