Displaying Other Video Sources
Note
(When using the KX-VC600)
•
In the combined screen display, the computer's screen, your
own screen, and the other party's screen are scaled and
displayed at 95 % of their original sizes.
•
You can press [Full Screen] to change between displaying/
hiding the guide area. (The guide area is initially hidden when
displaying the computer's screen.)
•
Press [R] to display only the computer's screen. Each time
you press [R], the display switches between the combined
screen and the computer-only screen.
(You can switch the display regardless of the guide area
display state.)
•
In the following cases, only the computer screen's image will
be shown, even if [PC] is pressed.
–
You are using H.323 or connected to an MCU or
non-Panasonic video conference system.
–
"Displays combined screen" (Page 90) is set to
"OFF" on the connection settings screen.
–
One or more other parties in the video conference call is
using a software version older than 2.30 (not including
2.30).
70
User Manual