Summit 200-48 Switch Rear View - Extreme Networks 200 Series Installation And User Manual

Summit 200 Series Switch Overview
Summit 200-48 Switch LEDs
Table 4 describes the LED behavior on the Summit 200-48 switch.
Table 4: Summit 200-48 switch LED behavior
Unit Status LED (MGMT LED)
Color
Green slow
blinking
Green fast
blinking
Amber
Fan LED
Color
Green
Amber blinking
Port Status LEDs (Ports 1–50)
Color
Green
Green blinking
Off
Media-Selection (Fiber) LEDs (Ports 49 and 50)
Color
Green
Off

Summit 200-48 Switch Rear View

Figure 4 shows the rear view of the Summit 200-48 switch.
Figure 4: Summit 200-48 switch rear view
Power Socket
The Summit 200-48 switch automatically adjusts to the supply voltage. The power supply operates
down to 90 V.
22
Indicates
The Summit switch is operating normally.
The Summit switch POST is in progress.
The Summit switch has failed its POST or an overheat condition
is detected.
Indicates
The fan is operating normally.
A failed condition is present on the fan.
Indicates
Link is present; port is enabled.
Link is present, port is enabled, and there is activity on the port.
Link is not present or the port is disabled.
Indicates
Fiber link is selected; mini-GBIC is present and being used for the
Gigabit Ethernet uplink.
1000BASE-T link is selected; the switch is using the RJ-45 port
for the Gigabit Ethernet uplink.
Power socket
LC48002
Summit 200 Series Switch Installation and User Guide