Extreme Networks 200 Series Installation And User Manual page 316

Software Upgrade and Boot Options
Table 74: Boot Option Commands (continued)
Command
save {configuration} {primary | secondary}
show configuration
upload configuration [<ipaddress> |
<hostname>] <filename> {every <time>}
upload configuration cancel
use configuration [primary | secondary]
use image [primary | secondary]
314
Description
Saves the current configuration to nonvolatile
storage. You can specify the primary or
secondary configuration area. If not specified,
the configuration is saved to the primary
configuration area.
Displays the current configuration to the
terminal. You can then capture the output and
store it as a file.
Uploads the current run-time configuration to
the specified TFTP server. If every <time>
is specified, the switch automatically saves the
configuration to the server once per day, at the
specified time. If the time option is not
specified, the current configuration is
immediately uploaded.
Cancels a previously schedule configuration
upload.
Configures the switch to use a particular
configuration on the next reboot. Options
include the primary configuration area or the
secondary configuration area.
Configures the switch to use a particular image
on the next reboot.
Summit 200 Series Switch Installation and User Guide