Extreme Networks 200 Series Installation And User Manual page 115

slot <n>
To display all the FDB entries on the entire stack, use the following command:
show fdb {<mac_address> | vlan <name> | ports <portlist> | permanent}
where:
mac_address
vlan <name>
ports <portlist>
permanent
If you enter the
on all switches.
To display the hosts that have been transmitting or receiving packets, and the port and VLAN for each
host on all members of a stack, use this command:
show ipfdb
To display the statistics for all members of a stack, use this command:
show fdb stats
Summit 200 Series Switch Installation and User Guide
Displays a slot on a stacked set of switches. Slot 1 specifies the
master switch, slots 2 through 8 specify member switches.
Displays the entry for a particular MAC address.
Displays the entries for a VLAN.
Displays the entries for a slot and port combination.
Displays all permanent entries, including the ingress and egress
QoS profiles.
command with no options specified, the command displays all FDB entries
show fdb
Displaying FDB Entries
113