Displaying Router Settings - Extreme Networks 200 Series Installation And User Manual

IP Unicast Routing
Figure 34: Unicast routing configuration example
192.207.35.1 192.207.36.1
192.207.35.0 192.207.36.0
Finance Personnel
2 3 4 5
192.207.35.11
192.207.35.13
192.207.36.14
192.207.36.12
EW_090
In this configuration, all IP traffic from stations connected to ports 2 and 4 have access to the router by
way of the VLAN Finance. Ports 3 and 5 reach the router by way of the VLAN Personnel.
The example in Figure 34 is configured as follows:
create vlan Finance
create vlan Personnel
config Finance add port 2,4
config Personnel add port 3,5
config Finance ipaddress 192.207.35.1
config Personnel ipaddress 192.207.36.1
config rip add vlan Finance
config rip add vlan Personnel
enable ipforwarding
enable rip

Displaying Router Settings

To display settings for various IP routing components, use the commands listed in Table 58.
202 Summit 200 Series Switch Installation and User Guide