Advertisement
Available languages
Available languages
,.ZJE }RE
YOU £ALL F©R
FOR MOST CONCERNSz
TRY THESE
FIRST:
° Check if oven controHs have been prop-
erHyset.
• Check to be sure pHug is secureHy inserted
into receptacle.
• Checkor re-setdrcukbreaker.
Checkor
replace fuse.
° Check power supply.
PART OR ALL OF APPLIANCE
DOES
NOT
WORK,
° Check if surface and/or oven contrds
have been properly set, See pgs, 5 & [ O.
• Check if oven door is unlocked after serf-
dean
cycle,
See
pg. [ 8.
° Check if oven is set for a delayed cool<or
dean program. See pgs, 14 & 18,
• Check if Control Lock is activated.Seepg,
II,
BAKING
RESULTS
ARE NOT
AS
EXPECTED
OR
DIFFER
FROM
PREVIOUS
OVEN,
• Hake sure the oven vent has not been
b[ocke& See pg. 8 for location,
° Check to make sure range is [eve[.
° Temperatures often vary between a new
oven and an old one. As ovens age, the
oven temperature
often "drifts" and may
become hotter or coder. Seepg, [2 for
instructions on adjusting the oven tem-
perature, NOTE: ins notrecommended
to adjust the temperature
if only one or
two recipes are in question.
° Check that oven temperature is decreased
by 25° F when convect baking.
° See _Coomdng Hade Simple"
booklet
for more information on bakeware and
baking,
° Hake sure oven is preheated when recipe
or directions recommend preheat.
• Check rack positions. See page [ 7.
FOOD
Is
NOT
BROILING
PRO -
PERLY OR SMOKES
EXCESSIVELY,
• Check oven rack positions. Food may be
too dose to element
° Aluminum foil was incorrec@ used. Never
line the broiler insert with foil
° Trim excessfat from meat before broiling,
• A soiled broiler pan was used.
OVEN
WILL NOT
SELF-CLEAN,
° Check to make sure the cycle is not set for
a delayed start. See pg. 18.
° Check if door is dosed,
OVEN DID NOT CLEAN PROPERLY,
° Longer cieaNng time may be needed.
° Excessivespiiiovers, especiallysugaryand/
or acid foods, were not removed prior to
the serf-dean cycle,
OVEN
DOOR
WILL NOT UNLOCK
AFTER SELF-CLEAN
CYCLE,
• Oven interior is still hot. Allow aboutone
hour for the ovento coo[ after the comple-
tion of a serf-deancycle. The door can be
opened when the LOCK indicator word is
not dispiaye&
MOISTURE
COLLECTS
ON OVEN
WINDOW
OR STEAM COMES FROM
OVEN VENT,
" This is normal when cooking or drying
foods high in moisture.
° Excessivemoisture was usedwhen dean-
ing the window.
SURFACE
OR GRILL BURNER FAILS
TO LIGHT,
• Check to be sure burner ports or ignition
ports are not clogged. See page 20.
• Check to be sure ignitor is dry and ciicking.
Burner wiN[not Hightif ignitor is damaged,
soiHedor wet. [f ignitor doesn't did<, turn
contro[ [<nob OFF.
SURFACE
OR GRILL BURNER
FLAME LIFTS OFF PORTS,
° Check to be sure a pan is sitting on the
grate above.
" Contact an authorized Jenn-Air servicer.
THE
FLAME IS UNEVEN,
• Burner ports may be clogge&
SURFACE
OR GRILL BURNER
FLAME IS YELLOW IN COLOR,
" Contact an authorized Jenn-Air servicer.
° Some yellow tips on the flame are accept-
able when using LP gas.
22
THERE
IS A STRONG
ODOR
OR
LIGHT
SMOKE WHEN
OVEN IS
TURNED
ON,
" This is normal for a new range and wiil
disappear after a few uses.
initiating a
dean cyclewii[ "burn off" the odors more
quickly.
• Turning on a ventilation fan wiil hdp
remove the smoke and/or odor.
° Excessivefood soils on the oven bottom.
Use a self-cleancycle,
VENTILATION
SYSTEM
IS NOT
CAPTURING
SMOKE EFFICIENTLY,
• Check on cross ventilation in room or
make up air.
° Excessiveamount of smoke is being cre-
ated; check instructions for grilling, trim-
ming meats. See pg.8.
° Outside wail cap may be trapped shut.
° Rangemay be improperly installed;check
ducting information. See pg.4,
° Air filter may be improperly installed.See
pg. 8.
A FAN SOUND
CAN BE HEARD
• This is the coding fan and is normal The
fanwiil continue to run after useuntil the
oven cooHs.
"F p_ PLUS A NUgrIBER
AND THE
NIESSAGE:
"CALL
AN
AUTHO-
RIZED SERVICER OR 800-688-1100o"
" This is called a fauk code. ffa fauk code
appears in the display and beeps sound,
press the Cancel pad. if the fault code
and beeps continue, disconnect power to
the appliance. Wait a few minutes, then
reconnect power. [f fault code and beeps
still continue, disconnect power to the
applianceand cai[ an authorized servicer.
° [f the oven is heavily soiled, excessive
flare-ups may resuk in a fault code during
a cleancycle, PressCancel padand allow
the oven to cod completely. Wipe out
excess
soil
then reset the dean cycle, [f
the fault code and beeps still continue,
disconnect power to the appliance and
cail an authorized servicer.
Advertisement
