Synchronize Date and Time
Use these steps to set the director to periodically synchronize date and time with
HAFM:
1. At the Configure Date and Time dialog box, choose the Periodic
2. Click Activate to enable synchronization and close the Configure Date and
3. Click Sync Now to synchronize the director and HAFM immediately. The
4. Click OK.
5. Click Activate to enable synchronization and close the Configure Date and
Director 2/64 Installation Guide
Date/Time Synchronization check box. The Date and Time fields are
grayed-out and not selectable.
Time dialog box. The director date and time synchronize with the HAFM date
and time at the next update period (at least once daily).
Date and Time Synced dialog box displays.
Time dialog box.
Installing and Configuring the Director 2/64
85