Fan Modules; Sbar Assembly; Upm Card Leds And Connectors - HP Surestore 64 - Director Switch Installation Manual

Overview
2
1
2
Figure 3: Director components—rear

Fan Modules

Two fan modules, each containing three fans (six fans total), provide cooling for
director FRUs, as well as providing redundancy for continued operation if a fan
fails.
The fan module can be replaced while the director is powered on and operating,
provided the module is replaced within 10 minutes (after which software powers
off the director). An amber LED for each fan module turns O
fail or rotate at insufficient velocity.

SBAR Assembly

The director ships with two SBAR assemblies. The active SBAR is responsible
for Fibre Channel frame transmission from any director port to any other director
port. Connections are established without software intervention. The assembly
accepts a connection request from a port, determines if a connection can be
32
3
1
Power module assembly
SBAR assemblies
SHR-2309
Fan modules
3
if one or more fans
N
Director 2/64 Installation Guide