Ac Power Connections - HP Surestore 64 - Director Switch Installation Manual

Figure 16: Rail tray mounting location requirement
4. Position and attach both rear brackets, as shown in
Director 2/64 Installation Guide
a. Locate the lowest U of the 9Us chosen for mounting the switch (the
lowest being U1).
b. Attach each rear rail tray bracket to the rear rack uprights at U1 (one on
the left and one on the right.
c. Secure each rail tray bracket using one M5 Torx screw.
Installing and Configuring the Director 2/64
Figure 17:
59