Hampton ® Cast Grills - FPI P36D-NG1 Owners & Installation Manual

1) Remove the 3 faceplate mounting phillips head screws from the
inside top of fi rebox, and discard if necessary.
2) Place top grill in brackets located inside top of fi rebox as shown.
Bracket
Top Grill
3) Remove hinge brackets on bottom left and right side of fi rebox by
removing 2 screws and discard brackets only.
4) Install new hinge brackets using the same 2 screws removed
in step 3.
FPI P36D-1 Zero Clearance Direct Vent Gas Fireplace
®
HAMPTON CAST GRILLS
5) Install hinge to bracket then secure with screw.
6) Place something underneath bottom grill to prevent scratching.
7) Line up hinge holes in bottom grill holes.
8) Place screws half way in -- do not secure completely.
Bracket inside
top of fi rebox.
9) Place bracket over screws then push to the side against faceplate
10) Tighten screws. (Screws will easily be tightened if using a stubby
Hinge bracket.
Left side shown.
Black Metallic Grills Only: Mount grill stopper to bottom of fi rebox
securing with one screw.
New hinge bracket.
Left side shown.
11) Adjust ball plunger if necessary.
HAMPTON
Hinge
Bracket
to lock in place as per diagram.
Bracket
screwdriver.)
®
OPTIONS
Grill
Stopper
59