Clearances; Barcelona With Double Screen Door - FPI P36D-NG1 Owners & Installation Manual

INSTALLATION
The clearances listed below are Minimum distances unless otherwise stated:
A major cause of chimney related fi res is failure to maintain required clearances (air space) to combustible materials. It is of the greatest
importance that this fi replace and vent system be installed only in accordance with these instructions.
IMPORTANT: See Barcelona & Palace™ Series Framing Note for framing note on
Clearance to Combustibles from:
Back
Side
Floor
NOTE: The minimum fl oor clearance must be maintained from the top surface of the carpeting, tile, etc.
Minimum Clearance from Top of Unit to:
Ceiling from top of unit. 32"
Side Wall Clearances:
Bay or Flush Front
Barcelona Front
Hampton Cast Faceplate
Kensington Front
Balmoral & Westminster Front
* Measured from Surround or Front. See Regency
Horizontal Vent Clearances:
Top
Side
Bottom
Vertical Vent Clearances
Alcove Clearances**:
Max. Depth
Min. Width
Min. Height
**Approved for one sidewall installation only when using Barcelona Front.
WARNING: Fire hazard is an extreme risk if these clearances are not adhered to.
The HeatWave Duct Kit and the Heat
Release Kit have different clearance
and framing requirements, check the
HeatWave and Heat Release manual
Heat Release Kit
for details.
10

CLEARANCES

Barcelona Front and Palace™ Series Fronts.
0" (0mm)
0" (0mm)
0" (0mm)
(1016mm)
6"* (152mm)
6"* (152mm)
6"* (152mm)
6"* (152mm)
6"* (152mm)
® Clearances section for dimensions.
2" (51mm)
1-1/2" (38mm)
1-1/2" (38mm)
1-1/4" (32mm)
36" (914mm)
48" (1219mm)
72" (1829mm)
Barcelona with Double Screen Door Installations
To install the combination of the Barcelona front and screen
doors you must use non-combustible mantel in conjunction with
the already required framing specs for the Barcelona front.
Steel studs and non-combustible material on the facing must be
adhered to.
FPI P36D-1 Zero Clearance Direct Vent Gas Fireplace