Initializing The Settings - Epson SQ-2550 User Manual

SelecType Settings
Note:
The settings changed by SelecType do not come into effect
l
until the printer is initialized. Initialize (reset) the printer
after changing any of the settings with SelecType.
The following options are described in more detail later in
l
this chapter: PAGE LENGTH, 1" SKIP, AUTO TEAR OFF,
FONT, PITCH, COUNTRY, and CG TABLE.

Initializing the settings

To make your new SelecType settings effective, the printer
needs to be initialized before printing. Your printer has a
special control panel feature that allows you to initialize the
printer's settings without having to turn off the printer. It also
allows you to conserve your ink supply, because it does not
activate the print head cleaning cycle.
After changing the SelecType settings, press both the
and
LOAD/EJECT
3-16 Using the Printer
buttons at the same time.
ON LINE