Using The Cut Sheet Feeder - Epson SQ-2550 User Manual

Using the cut sheet feeder

After stacking paper in the cut sheet feeder, be sure that the
light is lit. When the printer is on line, a new sheet of
LINE
paper loads automatically whenever a printable character or
line feeding command is sent to the printer. Subsequent sheets
are automatically loaded as needed.
Note: Be sure that you run the self test described earlier in
this chapter the first time you use the cut sheet feeder and
whenever you change to a different paper size.
Paper out condition
In the cut sheet feeder mode, the
the next sheet of paper is being fed, but the printer remains on
line.
When the selected paper bin is empty, the printer automatically
goes off line and the
printing, stack more paper, then press the
Note:
If you turn off your printer during a paper out or
paper jam condition, any data remaining in the printer's
buffer is discarded.
Control panel operation
To operate the cut sheet feeder from the control panel when the
printer is in cut sheet feeder mode, be sure that the printer is
off line.
LINE FEED:
PAPER OUT
Press this button to feed the paper one line, or
hold it down to feed the paper continuously.
light goes off while
PAPER OUT
light goes on. To resume
ON LINE
Using Printer Options 5-13
The Cut Sheet Feeder
ON
button.