Table of Contents
Advertisement
TEAR OFF:
MICRO FEED:
Press this button to feed the
perforation of continuous paper to
the tear-off edge of the printer.
After tearing off the paper, press
this button again to feed the paper
backward to the loading position.
See the short tear-off section in this
chapter for more information.
When the printer is in SelecType
mode, this button is used to change
the SelecType settings as a
button.
SELECTION
The A button is used to feed the
paper slightly forward and the
button is used to feed the paper
slightly backward. This feature is
used to adjust the top of form
position, short tear-off position, or
loading position.
Operating the Control Panel
Using the Printer 3-7
Advertisement
Chapters
Table of Contents
