Initializing The Network Settings From The Control Panel - Epson ES-C320W User Manual

Adding or Replacing the Computer or Devices
1. Press the button for more than 3 seconds to disable a Wi-Fi and AP mode connection.
The light and
Note:
Press the button to re-connect Wi-Fi and AP mode.

Initializing the Network Settings from the Control Panel

You can restore all network settings to their defaults.
The administrator password and user name will also be reset to their initial values at the time of purchase. If panel
lock is set, the panel lock feature will be turned off.
1. Turn off the scanner.
2. While holding down the
The light and
light turn off when these are disabled.
button, press the
light flash alternately and then turn off when restoration is complete.
>
Checking the Network Connection Status
button until light and
167
>
Initial
light turn on simultaneously.
...