Table of Contents
Advertisement
Problem
Single sheets do
not feed properly.
(continued)
The
LOAD/EJECT
button was pressed
and the platen
rotated, but paper did
not feed.
7-14 Troubleshooting
Solution
The left and right edge guides may be
placed too close together, preventing the
paper from feeding smoothly. Adjust the
position of the edge guides so that the
paper can move up and down freely.
Refer to 2-5.
The paper may not be firmly inserted
into the paper path. When feeding
thicker than normal paper, push down
lightly on the paper while you press the
button.
LOAD/EJECT
Paper select may not be set to Friction.
Make sure that the display on the
control panel shows Friction. If not, set
the pritner off line and press the
button until the Friction is
SELECT
displayed on the panel.
The dimensions of the paper you are
trying to use may exceed the specified
limitations of the printer. Make sure that
the paper sizes that are within the
specified range.
PAPER
Advertisement
Chapters
Table of Contents
