Problem
The paper feed is
crooked.
The paper does not
fully eject.
Solution
The paper guide may not be attached or
it may not be in the correct position.
When printing on single sheets, use the
paper guide in its upright position. Refer
to 2-18.
The left and right edge guides may be
placed too far apart. Adjust the edge
guides to match the width of your paper.
You may be trying to eject the paper
using the
FORM FEED
may not be fully ejected if you use the
button. Always press the
FORM FEED
button to eject the paper.
LOAD/EJECT
button. The paper
Troubleshooting 7-15