Skip Over Perforation - Epson SQ-2550 User Manual

Skip Over Perforation

By adjusting the SelecType 1" SKIP option, you can set skip
over perforation to ON or OFF. If this feature is ON when you
use continuous paper, a one-inch margin is provided between
the last printed line on one page and the initial printable line on
the next page so that the printer skips over the perforation.
This feature is very convenient if your application program
does not provide top and bottom margins.
If you adjust your loading position to the proper point, you can
get half of the margin at the bottom of one page and half at the
top of the next page as shown in the following illustration.
1" SKIP Off (Skip over perforation OFF)
Using the Printer 3-19