Options - Epson SQ-2550 User Manual

Options

Problem
Using the cut sheet
feeder, the paper
does not feed
properly.
The
LOAD/EJECT
button is pressed, but
the platen does not
move and the paper
does not feed.
After a print
command is sent from
the computer, the
platen does
not move
and the does
paper
not feed.
After a print
command is
sent
the computer, the
platen rotates, but
paper does not feed.
The
PAPER OUT
is on.
Solution
You may be pressing the
button while the printer is on line.
Always put the printer off line before
feeding the paper. Paper feeds
automatically when the cut sheet feeder
receives a print command from the
computer (only while the printer is on
line).
The printer may be off line. Press the
button to put the printer on line.
LINE
The paper select may not be set to the
cut sheet feeder. Use the paper select
from
button to select the cut sheet feeder (CSF
bin 1 or CSF bin 2). If you are using a
double-bin cut sheet feeder, make sure
that the correct bin number displays on
light
the display panel. Refer to 5-7.
LOAD/EJECT
Troubleshooting 7-21
ON