Running The Self Test - Epson SQ-2550 User Manual

the self test
Running
The self test can be run in either draft mode or Letter Quality
mode, depending on which button you hold down as you turn
on the printer.
Note: For the purposes of setting up and testing your printer,
most types of paper can be used. When choosing your paper
supply, however, you should always test it before regular
use. See the section in Chapter 2 on choosing paper.
CAUTION: Run the self test using paper that is at
least as wide as 217 mm (8.27 inches) if you have an
SQ-850, or 364 mm (14 inches) if you have an SQ-2550.
Before running the self test, make sure that the power cable is
connected to a properly grounded electrical outlet and the
printer is turned off.
1. While holding down the
the
FORM FEED
printer. The printer beeps three times and the
PAPER OUT
button (Letter Quality mode), turn on the
lights come on.
button (draft mode) or
LINE FEED
Setting Up the Printer
and
POWER
1-19