Epson SQ-2550 User Manual page 161

The Cut Sheet Feeder
FORM FEED:
LOAD/EJECT:
Software operation
The following commands cause the printer to eject the sheet in
the printer without loading the next sheet.
FF:
ESC EM R:
Note: The ESC EM command is a software command used to
control the operation of the cut sheet feeder. For more
information about this command, see the summary of
commands in Chapter 9.
5-14 Using Printer Options
When there is no paper in the printer and you
wish to load paper manually, press this button to
load the paper. (However, note that paper loads
automatically when you print.) When there is
paper in the printer, press this button to eject the
sheet without loading the next sheet.
When there is no paper in the printer and you
wish to load paper manually, press this button to
load the paper. (However, note that paper loads
automatically when you print.) When there is
paper in the printer, press this button to eject the
sheet without loading the next sheet.
Form Feed
Ejects a sheet in the cut sheet feeder mode